TP7136EC Decorative Small 3D Frame

This template is a combination of an EasyEmboss Template and the new EasyCut Templates. A new original concept from ParchCraft Australia. The first step is to Emboss the Frame using the Micro Ball Tool. Emboss the White lines only. Emboss both frames. Once you have completed embossing the frames, remove vellum from the template and complete any perforating and embossing you may wish to add. Ater you have finished this step turn vellum over so that it is 'FACE UP' and position it back on the template. Line it up carefully with centre embossed squares. Ensure that your embossed line matches up with the embossed line on the template. While doing this ensure that the Clear EasyCut Slot line is even all around the frame. 
Once happy with the positioning, press firmly in position on to the Blu-Tack dots or use tape. 

Emboss the Clear EasyCut Slot line using the Small Ball tool. After you have embossed the Slot line, use the Scriber tool to cut around the outside of the chosen frame, making sure that you "Break the Paper" each time you start a new cut. When you have finished cutting this outer edge, cut the inside frame using your PCA Scriber or a small craft knife. Remove it from the template and reposition the vellum over the second frame of the template. Line up as before. Complete as before with the first frame 

When you have completed both frames, assemble by stacking on top of each other and glue together. 

You may wish to view https://www.youtube.com/watch?v=OIlvs39tkH8 

(Remember that you do not have to use these frames for a 3D effect, they may just be used as individual single frames)